User's Manual

ClareOne 23
The ClareOne panel supports Arm Stay and Arm Away (panel
annunciation), and Silently Arm (no panel annunciation). When using
Silently Arm, the exit time is doubled.
• Violation, restoral, and then a second violation of an entry/exit zone prior
to the end of the Exit Time restarts the Exit Time. The panel does not
allow the Exit Time to be restarted more than once. This feature is
enabled by default. Duration of the additional Exit Time shall be doubled
for that additional exit period only but shall not exceed 255 seconds.
• A distinct annunciation is produced upon entry to warn those entering the
premises that the Entry Delay has started.
• The ClareHome application displays states for the panel (Armed,
Disarmed, Alarmed, Sensors Faulted or Troubled). Refer to the
ClareHome App Guide (DOC ID 1750) for additional information.
• The ClareHome application allows the user to Arm the ClareOne security
panel from any remote location if internet service is available on the panel.
Refer to the ClareHome App Guide (DOC ID 1750) for additional
information.
• The siren sounds for up to 4 minutes if the panel has not been disarmed.
After 4 minutes, the panel no longer sounds but remain in the alarm state.
To arm the panel:
1. Tap the Security Badge icon .
2. Tap Arm Away.
Note: When arming the alarm, you are given a default time of 60 seconds. If
more time is needed, tap Add 30 Seconds.
– or –