User's Manual

12 ClareOne
4. Insert the new battery’s header into the battery port on the panel
5. Gently place the battery into position with the battery’s cabling going above
the battery in the back of the panel.
6. Return the panel’s back plate.
Wired siren
The ClareOne Panel has a 2 pin terminal connector to attach an external wired
siren. The connector is labeled as “SIREN” and uses a 2-screw terminal. The
siren output acts as a simple contact closure, resulting in the wiring polarity being
irrelevant for connection. The wired siren and its power supply should be
connected as shown below. Use Class B wiring for all connections.
For more information on ClareOne Panel wired sirens, see ClareOne Wired
Sirens Integration Notes (DOC ID 1936).