User's Manual

ClareOne 11
Panel battery specifications and maintenance
The ClareOne Panel uses a rechargeable lithium-ion battery, specs listed below.
Table 1: ClareOne Panel Battery Specifications
Battery type
Rechargeable Lithium-ion battery, 5200mAh
Maximum battery voltage
4.35V DC
Maximum charging current
2600mA
Charging time
6.5 hours (at standard charge rate of 1040mA)
Manufacturer
Guangdong Pow-Tech New Power Co., Ltd.
Manufacturer part number
PT985082-PCM5200
Connector
3 pin latching connector
Battery duration
24 hours + 4 minutes of continued alarm after the
24-hour period
Changeable battery
Yes, user can change
Battery maintenance
The battery is rated to last over 18 years in typical installation environments. For
proper upkeep and panel reliability, the rechargeable battery should be
periodically tested by verifying that the panel operates without AC power. If the
battery needs to be replaced, a replacement battery can be ordered using Clare
Controls part number CLR-C1-BATT. The current battery capacity is displayed by
the battery indicator in the Status Bar (Figure 9).
To replace the battery:
1. Remove the panel’s back plate
2. Press down on the battery cable header tab, and then carefully pull down on
the header, releasing it from the connector on the panel.
3. Remove the battery and dispose of it properly.