User guide

HDBaseT 4x4 Matrix Switcher User Guide 27
Configuring the switcher using the web interface
You can configure the switcher’s inputs and outputs, user, interface, configuration, and
network settings using the switcher’s web interface. The interface displays
automatically when you log into the device.
To configure using the web interface:
1. Click the Main tab, and then click an input button and its corresponding output
button.
For example, click input 1 to set the cable box to output 1 (Living Room).
Note: Click All to select all outputs, or click Clear to clear all selections.
2. Click the Users tab to set your Admin password and to lock the front panel.