User guide

HDBaseT 4x4 Matrix Switcher User Guide 25
TCP/IP control
You can configure your switcher remotely using its web interface.
Connection modes
The default IP settings are as follows:
 TCP/IP: 192.168.0.178
 Gateway: 192.168.0.1
 IP control port: 4001
You can change the IP and gateway settings as needed. Do not change the serial port
number.
Connecting directly to a PC
Connect a computer to the TCP/IP port of the switcher, and set its IP address and
gateway to the same IP section as the default IP of the switcher (192.168.0.178).
Figure 15: Setting the PC’s IP address the same as the switcher