User guide

HDBaseT 4x4 Matrix Switcher User Guide 17
Control far-end device through IR ALL IN port
The IR signal received from the IR ALL IN port is transmitted to all the four far-end
HDBaseT receivers connected to HDBaseT ports of the switcher.
Figure 8: Control remote devices through IR ALL IN port
Control local device from remote
User can control local device remotely, such as video source device, switcher, etc.
When in use, the IR signal received from the HDBaseT receiver is transmitted to the
corresponding IR OUT port of the switcher.
IR receiver 1
Blu-ray
IR receiver 1IR receiver 2 IR receiver 1IR receiver 3 IR receiver 1IR receiver 4
IR receiver
IR remote