User guide

4 HDBaseT 4x4 Matrix Switcher User Guide
Product appearance
Front panel
Figure 1: Front panel of HDBaseT 4x4 Matrix Switcher
(1) Firmware
Micro USB port for updating firmware.
(2) Power indicator
Power 'on' indicator light.
(3) IR receiver
IR receive window.
(4) LCD indicator
Shows real-time system status.
(5) INPUTS/Menu
buttons
Normal mode: Input buttons range from 1 to 4.
Inquire mode: Press and hold “SELECT” for 3 seconds to enter
this mode. Press ◄► to change menus and ▲▼ to change
selection.
(6) Outputs
Output buttons, ranging from 1 to 4.
(7) Function buttons
SELECT button: Used to transfer HDMI and IR signal from an
input to an output.
Example To transfer both HDMI and IR signals from input channel
1 to output channel 3, press the buttons in this order:
“1”, “Select”, “3”.
GLOBAL button: Used to select all input to all outputs.
Example To transfer both HDMI and IR signals from all input
channels to all output channels, press the buttons in this order:
“1”, “GLOBAL”
EDID management button: Manually capture and copy the
EDID data from the output device to the input port.
Example To capture and copy the EDID data from output
channel 4 to input channel 2, press the buttons in this order:
“EDID”, “2”, “4”