User's Guide

DOC ID - 1563 • Rev 09 5 / 17
If the existing wiring is not long enough, follow the instructions below to
extend the wiring.
a. Insert the wires into the provided connectors.
b. Use pliers to snap the button into place.
Notes
• Do not strip the wires, the connectors pierce the insulation.
• The 2 wires used to power the doorbell can be connected to either
terminal.
5. Install the doorbell using the supplied mounting screws.
6. Restore power at the breaker, and then follow the instructions to setup the
doorbell in the ClareVision Plus app.