User guide

HDBaseT Extender Set 70m User Guide 1
Introduction
The extender set consists of a transmitter and receiver pair. HDMI signals are input into
the transmitter and HDBaseT technology is used to transmit the signals to the receiver
up to 230 ft. (70 m) via a Cat5e/Cat6 cable. The receiver then outputs the HDMI signal.
Bi-directional IR and RS232 are also transmitted across the Cat5e/Cat6 cable. The
extender set supports CEC, bi-directional RS232 and IR control, and PoC, which can
be used to power the receiver via the Cat5e/Cat6 cable. This eliminates the need for
power at the receiver end.
Features
• Supports full HD: Delivers high-resolution image (1080p at 60 Hz, 3D,
4K × 2K at 30 Hz)
• Maximum transmission distance is 230 ft. (70 m) over single a CAT5e/CAT6 cable,
or 40 meters for 4Kx2K at 30 Hz
• High bandwidth: 10.2 Gbps
• HDTV compatible: Uses HDMI 1.4 and is HDCP-2.2 compliant
• Support PoC (Power Over Cable) and CEC
• Connects with a displayer to transmit EDID and Hot Plug Detect (HPD) signals
constantly via the CAT5e/Cat6 cable
• Uses HDBaseT technology for extended capability and reliability
• Bi-directional RS232/IR control
• LED indicators show working status to aid in troubleshooting
• Wall or table mount aluminum enclosure
• External power supply (100~240 VAC, 50/60 Hz)
Package contents
• 1 x CM-BT10-TX70 HDBaseT transmitter
• 1 x CM-BT10-RX70 HDBaseT receiver
• 1 x 3.5 mm male mono to 3.5 mm male stereo IR adapter cable
• 4 x detachable mounting ears
• 2 x RS232 cables (DB9 to 3-pin connector)
• 8 x screws
• 1 x power adapter (24 VDC)
• 1 x user manual
• 1 x IR emitter
Notes: Ensure all the accessories are included. If not, contact your dealer.