Installation guide

18 ClareVision Network Video Recorder Installation Guide
2. You can edit the network information and the password of the camera.
3. Click Apply to save the settings, and then click OK to exit the interface.
PTZ control
Before you begin, ensure the PTZ is properly connected to the NVR through the
RS-485 interface.
PTZ settings
To set PTZ:
1. Enter the PTZ Settings interface (Menu > Camera > PTZ).
2. In the Camera drop-down menu, select the camera for the PTZ setting.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should match the PTZ camera parameters.
4. Click Copy if you want to copy the same settings to other PTZ cameras.
5. Click Apply to save and exit the interface.
PTZ control
In the Live View mode, press the PTZ Control button on the front panel or on the
remote, or choose the PTZ Control icon to enter the PTZ panel.