Installation guide

12 ClareVision Network Video Recorder Installation Guide
Using the Setup Wizard
By default, the Setup Wizard starts once the NVR has loaded.
To operate the Setup Wizard:
1. The Setup Wizard can walk you through some important settings of the NVR.
If you don’t want to use the Setup Wizard at this time, click Cancel. You can
also choose to use the Setup Wizard the next time by selecting the Start
wizard when device starts? checkbox.
2. Click Next on the Wizard window to enter the Login window.
3. Enter the admin username and password. The default username is
“clareadmin”; the default password is “secure7”.
4. To change the admin password, select the New Admin Password checkbox.
Enter the new password and confirm the password in the given fields.
Note: We strongly recommend changing the admin password on initial use.
Record this password in a safe place, if lost the NVR will require a factory
reset.
5. Click Next to enter the date and time settings window.