Installation guide

ClareVision Network Video Recorder Installation Guide 11
Menu operation
Startup and shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the
NVR.
To start your NVR:
1. Connect to a monitor using VGA or HDMI.
2. Check that the power supply is plugged into an electrical outlet, and then flip
the rear power switch to ON.
We highly recommend that you use an Uninterruptible Power Supply (UPS) in
conjunction with the device.
3. Press the POWER button on the front panel. The Power LED turns green as
the unit starts.
To shut down the NVR:
1. Enter the Shutdown menu (Menu > Shutdown).
2. Select Shutdown.
3. Click Yes.