Installation guide

4 ClareVision Network Video Recorder Installation Guide
Front panel
No.
Name
Description
1
Power
POWER: The POWER LED turns green when the NVR
is powered up.
2
Status
READY: The LED is green when the device is running
normally.
STATUS:
1. The light is green when the IR remote control is
enabled.
2. The light is red when the function of the composite
keys (SHIFT) are used.
3. The light will not be on if one of the above conditions
are not met.
ALARM: When an alarm occurs, the light will turn red.
HDD: The LED flashes red when the HDD is
reading/writing.
3
Tx/Rx
Tx/Rx LED flashes green when the network connection
is functioning normally.
4
USB
USB connector.
(1) (2) (3) (4)