Installation guide

ClareVision Network Video Recorder Installation Guide 1
NVR pre-installation
This NVR is highly advanced surveillance equipment that should be installed with
care. Follow these precautionary steps before the installation of the NVR.
• Keep all liquids away from the NVR.
• Install the NVR in a well-ventilated and dust-free area.
• Ensure environmental conditions meet factory specifications.
• Install a manufacturer recommended HDD.
Package contents
1 X 4 channel NVR appliance
1 X AC power cord
1 X optical mouse
1 X remote Control
1 X SATA hard drive cable
4 X small Phillips head screws
1 X technical bulletin: NVR Understanding Camera Capacity
NVR installation
When installing the NVR:
• Ensure there is ample room for the audio and video cables.
• When routing cables, ensure that the bend radius of the cables is no less than
five times the diameter.
• Connect both the alarm and RS-485 cable.
• Ensure the NVR is grounded.
• Environmental temperature should be within the range of 14ºF to 131ºF
(-10
ºC to 55 ºC).
• Environmental humidity should be within the range of 10% to 90%.