Installation guide

14 ClareVision Network Video Recorder Installation Guide
PTZ control
Follow the procedure to set the parameters for the PTZ. You should configure the
PTZ parameters before you set the PTZ of the camera. Before you begin, ensure
the PTZ and the NVR are connected properly through the RS-485 interface.
PTZ settings
To set PTZ:
1. Enter the PTZ Settings interface (Menu > Camera > PTZ).
2. Choose the camera for PTZ setting next to the Camera label.
3. Enter the parameters for the PTZ camera.
Note: All the parameters should be the same as the PTZ camera parameters.
4. Click Copy to copy the settings from other PTZ cameras.
5. Click Apply to save and exit the interface.