Installation guide

ClareVision Network Video Recorder Installation Guide 7
Startup
Proper startup procedures are crucial to expand the life of the NVR.
To start the NVR:
1. Check that the power supply is plugged in. We recommend that you use an
Uninterruptible Power Supply (UPS) in conjunction with the device.
2. Press the POWER button on the rear panel. The Power LED should turn
green as the unit starts.
Using the Setup Wizard
By default, the Setup Wizard starts once the NVR has loaded.
To operate the Setup Wizard:
1. Select the system language from the drop-down menu, and then click Apply
to save the resolution settings. The default language is English.
2. The Setup Wizard can walk you through settings of the NVR. If you do not
want to use the Setup Wizard, click Cancel. You can use the Setup Wizard
the next time by selecting the Start wizard when NVR starts? checkbox.