Installation guide

4 ClareVision Network Video Recorder Installation Guide
Front panel
No.
Name
Description
1
Power
POWER: The POWER LED turns green when NVR is
powered up.
2
Status
READY: The LED is green when the device is running
normally.
STATUS:
1. The light is green when the IR remote control is
enabled.
2. The light is red when the function of the composite
keys (SHIFT) are used.
3. The light is out when none of the above conditions are
met.
ALARM: The light is red when there is an alarm
occurring.
HDD: The LED flashes red when HDD is reading/writing.
3
Tx/Rx
TX/RX LED flashes green when network connection is
functioning normally.
4
USB
USB connector
(1) (2) (3) (4)