- Step One - 2
- Step Two - 3
- Step Three - 4
- Step Four - ( Front View ) 5
- Step Five - ( Front View ) 6
- Step Six - ( Back View ) 7
- Step Seven - 8
- Step Eight Slide the Canopy Hoop Poles onto the Canopy Poles until the spring buttons engage the holes near the ends of each Canopy Hoop Pole. Support the first Canopy Hoop Pole as pictured with the Rear Adjustable Spreader Pole and lean the two remaining Canopy Hoop Poles against the first.
- Step Nine Drape the Tent over the supported hoops then go inside and spread out the Canopy Hoop Poles, attaching the Roof Velcro as you go. Feed the length of the Porch Hoop Pole through the Porch Hoop Sleeve sewn on the Tent. Slide the Porch Hoop Pole onto the Porch Poles, engaging the second hole position. Attach the Porch Velcro on each side of the Tent. Remove the Rear Adjustable Spreader Pole now supporting the hoops to allow the tent to be “set” in the next step.
- Tips for Use Folding and transporting your Fish Trap is easy: ŀ Unsnap the Rear Spreader Pole and lay it in the bottom of the base. ŀ Push the spring buttons and retract each hoop, starting with the rear hoop and working towards the front. Rotate all retracted hoops to the resting position. Tuck the tent into the base and between the hoops so that no material is left hanging on the ground for transport.
