User Manual
Table Of Contents
- Content
- 1 Overall hydraulic system
- 2 Steering hydraulics
- System concept
- Fully hydraulic steering (Emergency steering)
- Orbitrol axle = Floating axle (1), the rigid axle (2) is tracked by electro-hydraulic means
- Orbitrol axle = Rigid axle (2), the floating axle (1) is tracked by electro-hydraulic means
- The floating axle (1) and the rigid axle (2) are steered electro- hydraulically - the Orbitrol steering circuit is closed.
- Steering valve VI
- 3 Working hydraulics
000 293 646 0 - SYS-H XERION 3300 - 04/05 29
2 Steering hydraulics
System concept
413
Adjusting the straight-line
stability of the rigid axle (2).
When "Emergency steering operation" is started, the current wheel position of
the rigid axle (2) is adopted. Straight-line stability may not be provided.
In this case:
– Open the shut-off valve (641)
– Set the rigid axle (2) to straight-line travel, using the steering wheel
– Close the shut-off valve (641) again.