User Manual
Table Of Contents
- Hydraulic System Variant 260/280
- Contents
- Chapter 1 Overall hydraulic system circuit diagram
- Chapter 2 Function
- Chapter 3 Valve components
- 3.1 Main valve block – without active hydraulic system Hydraulic circuit diagram
- 3.2 Baling chamber service shut-off valve – without active hydraulic system
- 3.3 Lock-up valve unit (734)
- 3.4 Pressure relief valve (754), Baling pressure build-up solenoid valve (Y50) without active hydraulic system
- 3.5 Flow controllers (755, 756)
- 3.6 Rotor cut-out clutch Shut-off tap (627)
- 3.7 ROTO CUT knife support IN/OUT solenoid valve (Y54/Y55)
- 3.8 Main valve block – with active hydraulic system
- Index
- 0299 256.1
TIC VARIANT 260/280 Hydraulic System
11/04 var-h 45
Key to diagram:
627 Rotor clutch / 2
n
d
belt drive shut-off valve
P, P1 Port
KL Connection
Description of function:
Port K Connection to rotor cut-out clutch and drive clutch
Port P Shut-off tap output = P input into control unit (6)
Port P1 Connection to tractor. This port is located on the back side of the shut-off
tap.