User Manual

2.0 Control terminal service menu (from module 1 no. 835024.3)
This menu serves as a tool in fault-finding. It shows the status of various
electrical components such as e.g. speed, voltage, pressure, switch
positions.
To enter the service menu, press the keys “Scroll main menu”, “Plus
key” and “Minus key” at the same time.
The following mask appears:
2.1 Service menu
structure
(from module 1
no. 835024.3)
Page "8/1 (Service 1)"
Control unit P+ PTO shaft speed [rpm]
Service1 81
Control unit P-
P= 0 L0 , 00 N0 = 0
Feed rake speed [rpm]
P0 255 N1 = 0
Inputs
P1 0 N2 = 0
Rotor speed [rpm]
E:00000000
Outputs
A:00000000 U:11 , 6
F:00000000 FFFF
Error
Key test
Current pressure [bar] Current bale length [m]
Voltage [V]
Page "8/2 (Service RC)"
(press "Sub-menu" key one more time)
Ser vi c e RC 8 2
W
=20 N0= 0
255 N1= 0
N2 = 0
E:00000000
A:00000000 U:11 , 6
F:00000000 FFFF
Cutting
frame angle
Diagnosis QUADRANT 2200/ 2200 RC TIC
10 08/2002