User Manual

TIC LEXION 500 Electric System
03/05 Lex-e-M M-19
Module A35 – Montana 570-520 control unit - with external MONTANA control unit
(up to serial no. 582 00051, 581 00026; 580 00028)
Pin Function Component Measuring
variable
Direction Circuit
diagram no.
1 Power supply (K69) --- 12 V Input 41s, 4s
2 Lower axle, left-hand side Y114 12 V Output 41s
3 Raise axle, right-hand side Y115 12 V Output 41s
4 Raise axle, right-hand side Y117 12 V Output 41s
5 Lower axle, right-hand side Y116 12 V Output 41s
6 Rotate front attachment to the left Y113 12 V Output 41s
7 Rotate front attachment to the right Y112 12 V Output 41s
8 Raise cutting angle Y110 12 V Output 41s
9 Lower cutting angle Y111 12 V Output 41s
10 Master valve (Montana) Y128 12 V Output 4s
11 Master valve (Working hydraulics) Y77, Y128 12 V Output 4s
12 Oil quantity increase Y118 12 V Output 41s
13 not used --- --- --- ---
14 Earth --- Earth Input 41s
15 Power supply (K69) --- 12 V Input 41s, 4s
16 Left-hand axle angle sensor signal B91 0.25-4.75 V Input 41s
17 Montana cross levelling sensor signal B94 0.25-4.75 V Input 41s
18 not used --- --- --- ---
19 not used --- --- --- ---
20 not used --- --- --- ---
21 CAN Low (Inclinometer) B126-1 - Output 41s
22 not used --- --- --- ---
23 CAN Low (Montana) A41 - Output 06s
24 Earth A41 Earth Output 06s
25 RS 232 --- --- --- 06s
26 RS 232 --- --- --- 06s
27 not used --- --- --- ---
28 Earth --- Earth Input 41s
29 Power supply (K69) --- 12V Input 41s, 4s
30 Right-hand axle angle sensor signal B92 0.25-4.75 V Input 41s
31 Cutting angle sensor signal B93 0.25-4.75 V Input 41s
32 Parking brake signal S93 12 V Input 41s
33 Earth sensors B91, B92,
B93, B94,
B95, B126
Earth Output 41s
34 not used --- --- --- ---
35 not used --- --- --- ---
36 CAN High (Inclinometer) B126 - Output 41s
37 Power supply (CAN) A41 12 V Output 06s
38 CAN High (Montana) A41 - Output 06s
39 RS 232 (Boot) --- --- --- 06s
40 RS 232 --- --- --- 06s
41 not used --- --- --- ---
42 not used --- --- --- ---