User Manual

TIC LEXION 500 Electric System
03/05 Lex-e-47a 47a-3
Description of function:
Sidefinder function: For better lateral lighting during threshing, additional lights (sidefinders)
are available as accessories.
When actuating the indicator switch (S16), a signal input is connected in
parallel to the sidefinder module (A33).
When the threshing mechanism is active (K14 – circuit diagram 7a) and
the lighting has been switched on by the vehicle lighting main switch
(S17 -), the indicator switch (S16) allows switching the sidefinders
(E71/E72).
As soon as the signal from the vehicle lighting main switch (S17) and/or
threshing mechanism ON (K14) is missing, the sidefinders are switched
off.
Pathfinder function: Activating the pathfinder function using the indicator switch (S16):
- This function is available only when the machine is at standstill (lights
off, threshing mechanism off, ignition off).
- Actuate the indicator switch (S16).
- The pathfinder function is started using the headlight flasher (wake
up) and it does not matter if the indicator switch (S16) was actuated
to the left or to the right.
Activating the pathfinder function using the vehicle lighting main switch
(S17):
- Threshing mechanism off
- Ignition off
- Lights off
- Repeatedly switching the lights on/off re-starts the pathfinder function
(up to 15 min. max. after ignition off).
- Both sidefinders plus the dipped headlights are switched on
simultaneously.
After 1 minute or after repeated actuation of the indicator or of the light
switch, the module shuts down all outputs and then shuts down itself.
Note:
- Indicator switch (S16) # Circuit diagram 36
- Vehicle lighting main switch (S17) # Circuit diagram 45
- Pathfinder lighting # Circuit diagram 47, 48
- Sidefinder lighting # Circuit diagram 48