User Manual

TIC LEXION 500 Electric System
03/05 Lex-e-36a 36a-3
Description of function:
Sidefinder function: Additional lights (sidefinder) are available as an accessory for better
lateral lighting during threshing.
When actuating the indicator switch (S16), a signal input is connected to
the sidefinder module (A33) in parallel.
With the threshing mechanism activated (K14 - circuit diagram 7a) and
the lighting switched on by the vehicle lighting main switch (S17 -), the
sidefinders (E71/E72) can now be switched on and off using the indicator
switches (S16).
As soon as the vehicle lighting main switch (S17) signal or the threshing
mechanism ON (K14) signal is missing, the sidefinders are switched off.
Pathfinder function: Activation of the pathfinder function using the indicator switch (S16):
- The function is possible only when the machine is at standstill (lights
off, threshing mechanism off, ignition off).
- Actuate the indicator switch (S16).
- The pathfinder function is started by means of the headlight flasher
(wake up) and it does not matter if the indicator switch (S16) has
been actuated to the left or to the right.
The pathfinder function is activated by the vehicle lighting main switch
(S17):
- Threshing mechanism off
- Ignition off
- Lighting off
- Repeatedly switching on/off the lighting re-starts the pathfinder
function (up to 15 min. max until ignition off)
- Both sidefinders plus headlights are switched on simultaneously.
Until 1 minute has expired or until the indicator or the lighting has been
actuated again, the module shuts down all outputs and then it shuts down
itself.
Note:
- Indicator switch (S16) # circuit diagram 36
- Vehicle lighting main switch (S17) # circuit diagram 45
- Pathfinder lighting # circuit diagram 47, 48
- Sidefinder lighting # circuit diagram 48