414-01
MODEL 100G 2100G Deluge Valve • U.L. Listed / U.L.C. Listed • Globe or Angle Pattern • Proven Reliable Design UL ® The Cla-Val Model 100G/2100G Deluge Valve is designed for use in controlling water flow to Deluge, Pre-Action, or Foam-Water type fire protection sprinkler systems. This valve is U.L. Listed in "Special Systems Water Control Valves Class I (VLFT)". The Model 100G-2100G is a hydraulically-operated, diaphragm-actuated, globe or angle pattern Deluge Valve.
To calculate the maximum wet sprinkler pilot height above the valve, use the graph below. Functional Data Valve Size CV Inches mm Globe Gal./Min. (gpm) Pattern Litres/Sec. (l/s) Factor Angle Gal./Min. (gpm) Pattern Litres/Sec. (l/s) Valve Size (Inches) 3 4 6 8 10 A 150 ANSI 12.00 15.00 20.00 25.38 29.75 B Dia. 9.12 11.50 15.75 20.00 23.62 AA 300 ANSI C Max. D E 150 ANSI EE 300 ANSI 13.25 8.50 10.00 12.69 14.88 4.97 6.00 8.00 8.62 8.50 10.50 4.81 5.81 -- G 4.75 J 2.
INSTALLATION / OPERATION / MAINTENANCE MODEL X46 Flow Clean Strainer • Self Scrubbing Cleaning Action • Straight Type or Angle Type The Cla-Val Model X46 Strainer is designed to prevent passage of foreign particles larger than .015". It is especially effective against such contaminant as algae, mud, scale, wood pulp, moss, and root fibers. There is a model for every Cla-Val. valve.
PARTS LIST 100-01 MODEL 3/8"-1 Hytrol Valve PARTS LIST ITEM DESCRIPTION A 1. 2. 3. 4. * 5. * 6. 7. 8. A 2.50 Cover Screw (8 Required) Cover Spring Diaphragm Washer Diaphragm Disc Retainer Assembly Body Plug (3/8 NPT) Body * Recommended Spare Parts OPERATING PRESSURE 1/8 NPT 2 3 1 4 1.50 5 3/8 NPT BOTH ENDS INLET 1.25 6 8 3/8 NPT 2.
PARTS LIST MODEL 100-01 1/2"-3/4"-1” Hytrol Valve PARTS LIST 100-01 3/4" & 1/2" Hytrol Valve OPERATING PRESSURE 1/8 3 1 4 2 C OUTLET INLET 6 7 A ITEM 5 9 10 13 1 2 3 4 5 *6 *7 8 9 10 11 12 13 1/2 1-7/16 A C (MAXIMUM) 2-3/8 25/32 D 100-01 1" Hytrol Valve 15 1 11 PARTS LIST ITEM OPERATING PRESSURE 1/4 16 2.68 22 OUTLET INLET 1.03 19 26 5.
Cla-Val Product Identification How to Order Proper Identification For ordering repair kits, replacement parts, or for inquiries concerning valve operation, it is important to properly identify Cla-Val products already in service by including all nameplate data with your inquiry. Pertinent product data includes valve function, size, material, pressure rating, end details, type of pilot controls used and control adjustment ranges. Identification Plates INLET EINTRITT ENTREE ENTRADA SIZE & CAT NO.
SPECIFY WHEN ORDERING HOW TO ORDER • Model Number • Globe or Angle Pattern • Adjustment Range (As Applicable) Because of the vast number of possible configurations and combinations available, many valves and controls are not shown in published product and price lists.
INSTALLATION / OPERATION / MAINTENANCE MODEL REPAIR KITS Complete Replacement Diaphragm Assemblies for 100-01 and 100-20 Hytrol Main Valves For: Hytrol Main Valves with Ductile Iron, Bronze Trim Materials—125/150 Pressure Class Only. FACTORY ASSEMBLED Includes: Stem, Disc Guide, Disc, Disc Retainer, Spacer Washers, Diaphragm, Diaphragm Washer and Stem Nut.
Repair Kits for 100-02/100-21 Powertrol and 100-03/100-22 Powercheck Main Valves For: Powertrol and Powercheck Main Valves—125/150 Pressure Class Only Includes: Diaphragm, Disc (or Disc Assembly) and O-rings and full set of spare Spacer Washers.
