Owner manual
CLA-VAL
Copyright Cla-Val 2011 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: claval@cla-val.com • Website cla-val.com
©
Dimensions
Model 100-04
Service
Cla-Val Control Valves operate with maximum efficiency when mounted in horizontal piping with the main valve cover UP, however, other
positions are acceptable. Due to component size and weight of 8 inch and larger valves, installation with cover UP is advisable. We recommend
isolation valves be installed on inlet and outlet for maintenance. Adequate space above and around the valve for service personnel should be
considered essential. A regular maintenance program should be established based on the specific application data. However, we recommend a
thorough inspection be done at least once a year. Consult factory for specific recommendations.
E-100-04 (R-8/2011)
Valve Size (Inches) 2 3 4 6 8 10 12 14 16
A 150 ANSI
9.38 12.00 15.00 20.00 25.38 29.75 34.00 39.00 41.38
AA 300 ANSI
10.00 13.25 15.62 21.00 26.38 31.12 35.50 40.50 43.50
B Dia.
6.62 9.12 11.50 15.75 20.00 23.62 28.00 32.75 35.50
C Max.
6.50 8.19 10.62 13.38 16.00 17.12 20.88 24.19 25.00
D 150 ANSI
4.75 6.00 7.50 10.00 12.69 14.88 17.00 19.50 20.69
DD 300 ANSI
5.00 6.38 7.81 10.50 13.19 15.56 17.75 20.25 21.75
E
1.50 2.56 3.19 4.31 5.31 9.25 10.75 12.62 15.50
F 150 ANSI
2.50 3.75 4.50 5.50 6.75 8.00 9.50 10.50 11.75
FF 300 ANSI
3.25 4.13 5.00 6.25 7.50 8.75 10.25 11.50 12.75
G 150 ANSI
3.25 4.00 5.00 6.00 8.00 8.62 13.75 14.88 15.69
GG 300 ANSI
3.25 4.38 5.31 6.50 8.50 9.31 14.50 15.62 16.50
H NPT Body Tapping
.375 .50 .75 .75 1 1 1 1 1
J NPT Cover Center Plug
.50 .50 .75 .75 1 1 1.25 1.50 2
K NPT Cover Tapping
.375 .50 .75 .75 1 1 1 1 1
Valve Stem Internal
Thread UNF
10-32
1
⁄4-28
1
⁄4-28
3
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄8-24
1
⁄2-20
Stem Travel
0.6 0.8 1.1 1.7 2.3 2.8 3.4 4.0 4.5
Approx. Ship Wt. Lbs.
35 70 140 285 500 780 1165 1500 2265
Valve Size (mm) 50 80 100 150 200 250 300 350 400
A 150 ANSI
238 305 381 508 645 756 864 991 1051
AA 300 ANSI
254 337 397 533 670 790 902 1029 1105
B Dia.
168 232 292 400 508 600 711 832 902
C Max.
165 208 270 340 406 435 530 614 635
D 150 ANSI
121 152 191 254 322 378 432 495 526
DD 300 ANSI
127 162 200 267 335 395 451 514 552
E
38 65 81 109 135 235 273 321 394
F 150 ANSI
76 95 114 140 171 203 241 267 298
FF 300 ANSI
83 105 127 159 191 222 260 292 324
G 150 ANSI
83 102 127 152 203 219 349 378 399
GG 300 ANSI
89 111 135 165 216 236 368 397 419
H NPT Body Tapping
.375 .50 .75 .75 1 1 1 1 1
J NPT Cover Center Plug
.50 .50 .75 .75 1 1 1.25 1.50 2
K NPT Cover Tapping
.375 .50 .75 .75 1 1 1 1 1
Valve Stem Internal
Thread UNF
10-32
1
⁄4-28
1
⁄4-28
3
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄8-24
3
⁄8-24
1
⁄2-20
Stem Travel
15 20 28 43 58 71 86 102 114
Approx. Ship Wt. Kgs.
16 32 64 129 227 354 528 726 1027
G
GG
D
Inlet
DD
F
100-04
Flanged
A
E
C
(MAX)
K
J
H
Inlet
Outlet
AA
B
(Diameter)