User's Manual

- Sensor setting
To enter the code-matching mode, place the sensor on top of
R-138a as the figure.
- If all user indicator LEDs are on, the sensor is new, unused.
Whereas if a specific user indicator LED is on, the sensor is assigned
to the corresponding user.
- Press the corresponding user key to assign the sensor to the user.
- Wetness display shows 3 wetness levels. Moist: 150ml;
Damp: 250ml; Wet: 350ml. Press the buttons to
change the volume of liquid for the “wet” level.
- The “Mute” indicator LED indicates whether the buzzer is muted or not.
- The code-matching mode will be automatically exited if no action is taken for 5 seconds.