Operation Manual

Page 9 of 18
36. DIGITAL OUT – A digital output connector for connecting the device to digital recording
devices or digital amplifiers.
37. USB MIDI PORT - Use this jack to connect to a computer or another MPCD-X3 player.
38. USB 2 PORT - This is the USB port where you insert your USB mass storage device.
39. HEADPHONE JACK & VOLUME CONTROL - This 6.3mm jack socket is used to connect
your headphones. The volume control is located next to it.
40. AUDIO OUT R & L - Audio out signals. Connect stereo RCA cable from audio out to a
mixer's line input.
41. PLAY INDICATOR - The play indicator will glow when the unit is in play mode.
42. PAUSE INDICATOR - The pause indicator will glow when the unit is in pause mode.
43. CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash
every time a new CUE POINT is set.
44. TOUCH INDICATOR - This appears when anything touches the JOG WHEEL.
45. FOLDER DISPLAY - This indicates which folder you are in.
46. CHARACTER DISPLAY - This will display the name of the track and album when an MP3
track is loaded.
47. BPM METER - This meter will display the BPM (beats per minute) of the current track.
AUTO BPM - This will indicate that the AUTO BPM counter is active.
48. MEMORY BUCKET - This indicator serves two functions. The bucket symbol details the
cue memory status, a full bucket outline indicates the cue memory is full. The five bars
in the memory bucket detail the digital buffer. Each bar indicates 2 seconds. The search
functions will not operate until all the bars are full.
49. CD/USB INDICATOR - This indicates which port is active. Use the SOURCE button to
select your desired port.
50. TEMPO LOCK - This will indicate the TEMPO LOCK function is active.
51. PITCH INDICATOR - This meter will display the pitch percentage applied by the pitch
slider.