Operation Manual

Page 4 of 18
General Functions and Controls
1. USB PORT 1 - This is the USB port where you insert your USB mass storage device (up
to 32gb)
2. SOURCE SELECT - Use this button to select CD/USB1/USB2/MIDI music. Hold the
SOURCE SELECT button for 2 seconds to enter MIDI mode.
3. BRAKE, START DIAL
a. BRAKE DIAL – When the BRAKE dial is rotated to MIN, play stops instantly; when
the dial is rotated from MIN up to MAX, play slows down before coming to a
complete stop.
i. When in VINYL mode, the BRAKE dial determines the deceleration speed
until play stops, when the top of the jog wheel is held down (Note: It is advised
to hold the side of the jog wheel with one hand while doing this as any movement from the jog
wheel at this point will cause the unit to go in to scratch mode)
ii. When in CD DJ mode, this BRAKE dial determines the deceleration speed
until play stops when the PLAY/PAUSE button is pressed.
b. START DIAL - When the START dial is rotated to MIN, play will start instantly.
When the dial is rotated between MIN up to MAX, play starts slowly before reaching
full playback speed.
i. When in the VINYL mode, this START dial determines the acceleration speed
until full playback speed is reached when using the jog wheel to scratch,
backspin or stop the track.
ii. When in the CD DJ mode, this START dial determines the acceleration speed
until full playback speed is reached when the PLAY/PAUSE button is pressed.
4. TEMPO RANGE BUTTON - Press the button to choose pitch percentage adjustment
percentage. ±6%, ±10%, ±16%, and ±100%. With this button you can also switch the
PITCH SLIDER on or off by pressing and holding it for 2 seconds.
5. KEY LOCK - This button turns on or turns off the KEY LOCK function. This function
allows you to use the PITCH SLIDER to speed up or slow down playback speed but
without altering the tonal pitch of the track.
6. TOGGLE BUTTON (WHEEL MODE) - Press the TOGGLE button to select the operation
mode: VINYL/CD DJ/A.CUE SCRATCH.
a. VINYL - When wheel mode is set to VINYL, use the JOG WHEEL to activate the
scratch effect by touching the surface of JOG WHEEL and moving it clockwise and
anti clockwise.
b. CD DJ - When wheel mode is set to CD DJ use the JOG WHEEL to pitch bend and
frame search.
c. A.CUE SCRATCH
i. IN PLAYBACK MODE - While music is playing, the JOG WHEEL can be used
to return the unit to last set CUE point (using the IN button). Simply touch
the JOG WHEEL and unit will immediately return to the last set CUE point.
ii. IN CUE MODE - While the music is not playing (CUE mode), tapping the JOG
WHEEL will start the playback. Hold your finger on the jog wheel to continue
playback. When your finger is released the music will stop and go back to
the last CUE point.
7. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. Move the
slider down to speed up the music and move the slider up to slow down the music.