Manualshelf

Operation Manual

ManualsBrandsCitronic ManualsAudioMPCD-X3
9101112131415161718
Page 14 of 18
System Requirements
CPU: Intel Pentium 4, 1 x GHz processor, Intel Centrino Mobile Technology 1.6GHz or
above
RAM: 512MB
DISK SPACE: 100MB of free disk space needed
OS: Microsoft Windows XP SP3, Vista SP2, Windows 7
Link Up
With this function a USB device can be loaded into one MPCD-X3, the connected to another
MPCD-X3 as a connected host USB player. Follow the directions below to setup the link function.
MAIN PLAYER:
1. Press the PRESET button to enter the internal menu.
2. Once you are in the internal menu, turn the FOLDER knob until MIDI SETUP is displayed.
3. Press the SHIFT button and turn TRACK knob until the USB = LINK is displayed, and
press the PRESET button to save the setting and exit.
4. Now load your USB1 device into the MAIN PLAYER.
5. Connect the MAIN PLAYER using the rear USB MIDI port to the second player top USB 1
port.
6. You should now be able to access the main player loaded USB device using the second
player controls.
(NOTE: The USB1 port must be used for storage device and read first before connecting
the second player)
MAIN PLAYER (with loaded USB Device)
SECOND PLAYER
WARNING:
It is recommended that the USB cable be at least
28 gauge or higher and no more than 2 meters long.
USB CABLE