Operation Manual

Page 10 of 18
52. TIME BAR INDICATOR - This bar gives a visual approximation of a track or discs time.
This bar will begin to flash when a track is ending.
53. TIME METER - These indicators will detail the current minutes, seconds, and frames.
The meter will display either the elapse, total, or remaining time of a track or the entire
disc. The display time will depend on the selected time function. The selected time
function will be displayed above the TIME METER as total remaining, remaining track
time or elapsed track name.
54. REMAIN / ELAPSED INDICATOR - When REMAIN is indicated in the VFD display the
TIME METER will show the current track's remaining time. When ELAPSED is indicated in
the VFD display the TIME METER will show the current track's elapsed time.
55. TRACK DISPLAY - This indicator describes which track is currently cued or is playing.
56. SINGLE INDICATOR - This indicates that the track is in single play mode, the track will
play once and return to CUE mode. If the single indicator is not on, the unit is in
continuous mode.
57. RELOOP INDICATOR - Appears when LOOP is engaged or ready to be engaged.
58. AUTO CUE - This will indicate if the AUTO CUE is on or off. Press and hold the SGL/CTN
for 1 second to turn the AUTO CUE function on and off.