™
Important Safety Information WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. 2. In order to prevent electric shock, do not open the top cover.
Important Safety Instructions 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. 2. Retain Instructions － The safety and operating instructions should be retained for future reference. 3. Heed Warnings － All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions － All operating and use instructions should be followed. 5.
Setting up the MPCD-4 Ultima 1.Checking the Contents Check that the carton contains the following items: 1. Main unit 2. Control unit 3. Operating instructions 4. Pair of 8-pin Din connector cables 4. Pair of RCA phono leads 5. A pair of 3.5mm mini jack leads 6. An AC power cord 2. Installing the Unit 1. Place your unit on a flat surface or mount it in a secure rack mount case. 2.
Features and functions of Player Front: 1. Eject Buttons Pressing this button will eject the disc on its respective side. The disc will not eject unless the player is in cue or pause mode, this prevents the user accidentally ejecting the disc while in play mode. 2. Power Button This button is used to switch the main power to the unit; a bright blue LED indicates power on. 3. Disc Present LED When no disc is present the LED will be lit giving a visual guide for inserting the disc into the slot.
Features and functions of Controller Front: 1. Eject Button Pressing this button will eject the disc on its respective side. The disc will not eject unless the player is in cue or pause mode, this prevents the user accidentally ejecting the disc while in play mode. 2. Jog Wheel The jog wheel is multi functional. When in pause mode turning the jog wheel will search the CD frame by frame in 1-second increments.
12 Pitch selection LEDs These LEDs give a visual indication of the pitch range that is currently selected as follows: • ±4% - The % (11) button will be illuminated red • ±8% - The % (11) button will not be lit and the 8% LED will be illuminated in red • ±16% - The % (11) button will not be lit and the 16% LED will be illuminated in blue • ±100% - (CD-A ONLY) The %, 8% and 16% will be illuminated 13.
Rear: 1. Remote Control Connector 2 Connect the 8-pin mini din connecting lead supplied from this connection to the main player unit remote control connector. This allows the control of deck 2 via the controller. 2. Remote Control Connector 1 Connect the 8-pin mini din connecting lead supplied from this connection to the main player unit remote control connector. This allows the control of deck 1 via the controller. 3. Control Start Deck 2 Connect the 3.
8. Track number This gives the track number of the disc up to 999. When folder access is enables it shows the track number of the selected folder. 9. Folder Access When folder access is enabled this text will illuminate giving an indication of the folder number selected up to a total of 99. 10. Total/Remain Time This gives an indication of the track time selected time remain, (remain will be lit) Total Time remain (CD-A only, Total Remain will be lit) when neither is lit this indicates Time Elapsed. 11.
Operation Setting A Cue Point There are a few different ways to set a Cue point, a Cue point can be made anywhere on the disc. Once set, pressing the Cue button (6) will return the CD to this point. A Cue point can also be assigned to each of the three memory bank buttons (21) allowing for three independent accessible Cue points set from anywhere on the disc.
Clearing IMS Memory The IMS memory will hold up to 500 Cue/Loop points. When full the memory can be cleared, to do this, with the unit power off, press the Time button (13) hold and switch the power on (2) the screen (15) will indicate the settings are being clear by showing the word “Erasing”. Saving User Profile The MPCD-4 allows the user to save a profile of which settings are available on start-up.
Technical Specifications Performance Characteristics (test disc: TCD-782, Load=47Kohm) Quantization Sampling Rate Over Sampling Rate Output level Load Impedance: Channel Balance Frequency Response De-Emphasis Channel Separation* THD – Noise* S/N Ratio (HF-A)* : 16 bit linear per channel : 44.1 KHz at normal pitch :8x : 2Vrms ±0.5dB : >47K ohm : 0.1dB : ±0.4dB (20Hz-20KHz, 0dB) : ±2.4/-0dB (16KHz, -20dB) : 100dB : 0.006% : 102dB Note* with 20KHz low pass filter.
™
To see more products in the range visit…. www.citronic.
