Specifications
COMPACT LINE ARRAY SOUND REINFORCEMENT SYSTEM
1
3
2
4
492
437
608
536
262
133
852
900
250
6
INSTALLATION
(1) Open the package and take out 171.227 speakers
and the accessories.
(2) Mount the four M8 rings to the flying frame (see
Figure 1).
(3) Demount the two M5 thumb screws at the bottom
Of LF, and take out the Back Link A.
INSTALLATION METHOD 1
ONE CLUSTER FLOWN VERTICALLY
(4) Demount the two M5 thumb screws at the top of
the front side of MF/HF.
(5) Insert the two LF Front Links into the U grooves
along the left & right front edges of MF/HF, make
sure the two screw holes on both sides are aligned,
and tighten the screws through the holes.
(6) Insert one end of the Back Link A into the U groove on the
back of MF/HF and the other end into the U groove on the
bottom of LF, make sure the two screw holes at both ends
of the link are aligned with the corresponding holes in the U
grooves, mount the two M5 thumb screws, and tighten them
(see Figure3). Alignment of the white scale lines on the Back
Link A with the edges of the two U grooves indicates
successful mounting.
. .
For example, if the splay angle between two MF/HF
speakers is designed to be 5 , the scale line marked
with the number of 5 on the Back Link B must be aligned
to the bottom edge of the groove on the back of the top
speaker, then a certain hole in the Back Link B will be
found to be aligned with Number 2 hole in the groove at
the back of the top speaker. Insert a M5 thumb screw
through the two aligned holes and tighten it.
Turn MF/HF speaker together with its Back link Back Link B,
make sure the right scale line marked on the Back Link B
is aligned with the edge of the U groove at the back Of MF/HF
speaker (The numbers marked besides each scale line indicate
different splay angles). Then insert the M5 thumb screw through
the aligned holes of the B ack Link B and the U groove at the
back of the speaker (Alignment with Number 1 hole in the groove
is required when0 /2 /4 /6 /8 /10 of splay angle is
wanted, and alignment with Number 2 hole is required when
3 /5 /7 /9 Of splay angel Is wanted).
SPLAY ANGEL ADJUSTMENT
No.1 Hole
No.2 Hole
171.227