Specifications

COMPACT LINE ARRAY SOUND REINFORCEMENT SYSTEM

Five parameters in the dynamic range table is adjustable(the inner parameter is no name,

not adjustable)

Threshold: Is the limit value of compression, adjustable from 0dB to -49.5dB

Ratio: Compression ratio,adjustable from 1:1 to &¡ Þ:1

RMS Estimator Time: The checking time of limit value of compression

Release time: Release compression time after the checking that the signal level is

under the limit

Attack time: Start up time after checking that the signal level is above the limit.

5.2.4> Dynamic range control

Press DRC button(or COMPRESSSION/LIMIT), the interface is as following:This compression just check the

HF signal, once the signal reach the limit, it will compress the HF and LF synchronously(synchronous action

is for the balance of HF and LF)

5.2.5> The delay setting of output channel

Mainly adjust the distance of sound center to make sure the sound center is same. Press DELAY with mouse,

the 5.2.4 interface will be showed, the right side is the delay adjust range from 0.0208ms to 21.2292ms.

SOFTWARE OPERATION INSTRUCTIONS

171.227