Specifications

COMPACT LINE ARRAY SOUND REINFORCEMENT SYSTEM
1
2
3
5
4
8
INSTALLATION
INSTALLATION METHOD 4 (THE LONG FLYING FRAME IS OPTIONAL)
INSTALLATION METHOD 5
Multi clusters flown from front to back
(maximum 4 clusters)
One cluster flown from front to back
Open the package, take out 171.227 speakers and
the accessories.
Open the package of the long flying frame, take out
the frame and accessories.
Mount the M8 rings to the long flying frame (see
Arrow 1), and insert the Back Link B inside the
middle groove of the long flying frame (see Arrow 2).
Put the long flying frame upside down (with the rings
downside).
Demount the two M5 thumb screws at the top of
the front side of MF/HF.
Put the MF/HF upside down. Insert the Front Links of
the long flying frame into the U grooves along the
left & right front edges of MF/HF, make sure the two
screw holes on both sides are aligned, and then
tighten two M5 thumb screws through the holes.
Turn the MF/HF speaker, make the scale line marked
with the number of 0 on the Back Link B attached to the
long flying frame aligned with the bottom edge of
the U groove, then insert a M5 thumb screw through
the two aligned holes and tighten it (see figure 4).
Demount the two M5 thumb screws at the bottom
of LF, and take out the Back Link A. Then demount
the four M5 thumb screws connecting the LF and
the short flying frame, and disassemble the short
frame.
Put the LF upside down, insert the four links on
the back of the long flying frame inside the U grooves
of the LF and make sure the screw holes are aligned
accordingly. Then mount and tighten two M5 screws
through the holes.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
No.1 Hole
No.2 Hole
171.227