Operation Manual

© 2010
Stereo Section
(9) CH.1 PHONO/LINE – Input selector for channel 1, turntable or line input
(10) CH.2 CD/LINE – Input selector for channel 2, CD player or line input
(11) CH.3 CD/LINE – Input selector for channel 3, CD player or line input
(12) CH.4 PHONO/LINE/MP3 – Input selector for channel 4, turntable or line/MP3 player
(13) MP3 IN – 3.5mm stereo jack socket for personal MP3 player or other portable source
(14) MP3 - LINE – Slide switch to select MP3 input or rear panel line input for channel 4
(15) GAIN – Individual gain controls for each stereo channel for matching input levels
(16) Hi EQ – High frequency cut/boost for each stereo channel
(17) Mid EQ – Middle frequency cut/boost for each stereo channel
(18) Lo EQ – Low frequency cut/boost for each stereo channel
(19) Fader – Individual volume fader for each stereo channel
(20) CUE – Routes channel to meters and headphones for monitoring and cueing tracks
(21) DEFEAT – Disables crossfader control over stereo channels
(22) ASSIGN – Selects channel 1 or 2 for left side of crossfader
(23) Crossfader – Allows seamless fading between 2 assigned channels
(24) ASSIGN – Selects channel 3 or 4 for right side of crossfader
Master Section
(25) VU Meters – Dual 10-segment LED volume meters
(26) LEVEL– Master volume level rotary control
(27) CUE MIX – Varies headphones signal between cue
selected channel(s) and main programme output
(28) 12 LIGHT – BNC connector providing 12Vdc for
console light up to 5W output
(29) POWER – Main power switch and LED indicator
(30) BOOTH LEVEL – Level control for BOOTH OUTs (39)
(31) Headphones LEVEL – Headphone volume control
(32) Headphones – 6.3mm stereo jack socket for
headphones output