Technical data

BETRIEBSANLEITUNG
10
4.2.2 Image Adjustments
Within the main-menu item “Image Adjustments“ you can control image settings like brightness, contrast, etc.
Brightness Use ▲▼-keys to adjust brightness
Contrast Use ▲▼-keys to adjust contrast
Backlight Use ▲▼-keys to adjust backlight brightness
Backlight mode Valid only with ambient light sensor
4.2.3 Color Adjustments
Within the main-menu item “Colour Adjustments“ you can control colour settings like colour temperature etc
Autom. Colour
Adjust
Automatic Adjustment of colour parameters
Switch sRGB Simulates a CRT´s color space
Colour
temperature
Use ▲▼-keys to select predefined colour
temperature or individual settings
4.2.4 VGA Adjustments
Within the main-menu item “VGA Adjustments“ you can control the settings for the main input channel. This menu
item can be selected only when VGA video input is active.
Auto Adjust Press „Select“ to start automatic adjustment
Clock Manual fine tune of clock settings
Phase Manual fine tune of phase settings
H-Position Adjustment of horizontal image position
V-Position Adjustment of vertical image position
4.2.5 System Adjustments
OSD Timeout Duration OSD displays after last key pressed
OSD Hor.
Position
Control horizontal OSD position
OSD Vert.
Position
Control vertical OSD position
OSD Direction Mirror and rotate OSD
Reset Load factory settings. All individual changes are
lost!
Reset Colour
Adjustments
Set colour settings to nominal values
Reset Geometry Set image geometry to nominal values
Sharpness Control image sharpness
Overlap
Mode Select
Manual DOS mode settings