Operation Manual

In the event of a breakdown
134
Changing a fuse
The extraction tweezer is fitted to the back of
the fusebox cover in the dashboard (right-hand
side).
For access:
F Unclip the cover and remove it completely
by pulling it towards you.
F Remove the tweezer.
Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified.
F Check that the ignition switch is in the
"LOCK" position.
F Identify the failed fuse by checking the
condition of its filament.
Changing a fuse
Good Failed
F Use the special tweezer to extract the fuse
from its location.
F Always replace the failed fuse with a fuse
of the same rating.
F Check that the number marked on the box,
the rating marked on the top of the fuse
and the tables below all agree.
CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying the malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in particular when the
consumption of all of the additional
equipment connected exceeds
10 milliamperes.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, contact a CITROËN dealer or a
qualified workshop.