Operation Manual

84
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Removing the seat
- If necessary, move the front
seats forward and lower the head
restraint.
- Place the seat in the fully folded
position.
Good practice
Followingthevariousoperations:
- do not remove a head restraint
withoutstoringitandxittoa
support,
- ensure that the passengers can
always access the seat belts and
fasten them easily,
- passengersmustnevertake
theirseatwithoutadjustingand
fasteningtheirseatbelt.
Refer to the "Fully folded position"
describedpreviously.
- Press the red lever to release the
frontfeet.
- Tilt the entire seat rearwards by
approximately 45° without releasing
thelever.
- Releasethelever.
- Lift the seat vertically to the limit of
theanchorages.
- Straighten the seat by tilting it
forwardsthenliftit.
Refitting the seat
- Tilttheseatforwardby45°.
- Placethehooksbetweenthetwo
bars.
- Foldbacktheseattoxtherear
anchoringpoints.
- Pull the control to return the seat
backtoitsinitialposition.
- Raisetheheadrestraint.
Beforeunfoldingtheseat,check
thatnoobjectisobstructingthe
anchorage points or preventing
correctlockingoftheseats.