Operation Manual

83
EASE OF USE and COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Adjusting the angle of the seat backrest
Placing the seat back in the
table position
Returning the seat back to the sitting position
Placing the seat in the fully
folded position
Returning the seat to its original position
- Operatethecontrolandadjustthe
angleoftheseatbackrest.
- Pullthecontroltofoldtheseatback
ontotheseatcushion.
Donotplacehardorheavyobjects
onthetable.Theycouldbecome
dangerousprojectilesintheeventof
sharpbrakingorimpact.
- Releasetheseatbackbypulling
the control, then return it to its
originalposition.
Whenreturningtheseatbackrestto
the sitting position, ensure that it is
lockedsecurely.
- Pull the control to place the seat
backinthetableposition.
- Raise the bar located behind the
seat to release the rear anchoring
points.
- Tilt the entire seat forwards, until it
locks.
- Pushtheredcontrol.
- Foldbacktheseattoxtherear
anchoringpoints.
- Raisetheseatbackrestbypulling
thecontrol.
- Checkthattheseathascorrectly
lockedintoplace.
Beforeunfoldingtheseat,check
thatnoobjectisobstructingthe
anchorage points or preventing
correctlockingoftheseats.