Operation Manual

72
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Ventilation
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Good practice
For maximum cooling or heating of the
passenger compartment, it is possible
to exceed the value 15 by turning until
LOisdisplayedorthevalue27by
turninguntilHIisdisplayed.
On entering the vehicle, the inside
temperature may be much colder
(orwarmer)thaniscomfortable.There
is no advantage in changing the value
displayedinordertoquicklyreachthe
levelofcomfortrequired.Thesystem
will use its maximum performance to
reachthecomfortvalueset.
DIGITAL AIR CONDITIONING
Automatic operation
AUTO comfort programme
This is the normal air conditioning
systemoperatingmode.
Driver or passenger side comfort
value
The value indicated in the screen
corresponds to a level of comfort and
not a temperature in degrees Celsius
orFahrenheit.
Turn this control to the left
or to the right to decrease or
increasethevalue.Asetting
around the value 21 provides
optimumcomfort.However,
depending on your requirements, a
settingbetween18and24isusual.
Do not cover the sunshine sensor
locatedonthedashboard.
Press this button, the AUTO
symbolisdisplayed.
The system controls the
distribution,theowandthe
intakeofairtoguarantee
comfortandasufcientcirculation
of air in the passenger compartment
accordingtothecomfortvalueset.No
furtheractiononyourpartisrequired.
Airowwillincreasegraduallywhen
the engine is cold, to prevent excessive
distributionofcoldair.
For your comfort, the settings are
stored when the ignition is switched off
and are reinstated the next time the
vehicleisstarted.
The automatic function will no longer
be maintained if you change a setting
manually(AUTOiscleared).
SEPARATE SETTINGS FOR DRIVER AND PASSENGER