Operation Manual

67
Steering mounted controls
EASE OF USE and COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
The speed of the vehicle responds to
the pressure of the driver's foot, up
to the the accelerator pedal's point of
resistance, which indicates that the
programmedspeedhasbeenreached.
However, pressing the pedal beyond
thispointofresistancetotheoor
allows the programmed speed to be
exceeded.Toresumeuseofthelimiter,
simply reduce the pressure on the
accelerator pedal gradually and return
toaspeedbelowthatprogrammed.
Adjustments can be carried out
when stationary, with the engine
running, or with the vehicle moving.
This speed limiter shows the function
selection status in the instrument panel
anddisplaystheprogrammedspeed:
SPEED LIMITER
"LIMIT"
Function selected,
displaying of the
"Speed Limiter"
symbol.
Function off,
last programmed
speed - OFF.
Functionon.
Vehicle speed above,
the programmed
speed setting is
displayedashing.
Operating fault
detected,
OFF - the dashes
ash.
1. LimitermodeOn/Off.
2. Reduce programmed speed
setting.
3. Increase programmed speed
setting.
4. SpeedlimiterOn/Pause.
"This is the selected speed which the
driverdoesnotwishtoexceed".
This selection is made with the engine
running while stationary or with the vehicle
moving.Theminimumspeedwhichcan
beprogrammedis20mph(30km/h).