Operation Manual

63
Steering mounted controls
EASE OF USE and COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
TRIP COMPUTER
A few definitions
Range: displays the distance which
can travelled with the remaining fuel
detectedinthetank,basdonthe
average consumption over the last few
miles(kilometres).
This displayed value may vary
signicantlyfollowingachangeinthe
vehiclespeedorthereliefoftheroute.
Current fuel consumption: only
calculated and displayed above
20mph(30km/h).
Average fuel consumption: this is the
average fuel consumption since the
lasttripcomputerzeroreset.
Distance travelled: calculated since
thelasttripcomputerzeroreset.
Distance remaining to the
destination: calculated with reference to
thenaldestination,enteredbytheuser.
If guidance is activated, the navigation
systemcalculatesitasacurrentvalue.
Average speed: this is the average
speed calculated since the last trip
computerzeroreset(ignitionon).
Each press of the button, located at
theendofthewiperstalk,displaysthe
different trip computer information in
turn,dependingonthescreen.
When the required trip is displayed,
press the control for more than
twoseconds.
When the range falls below 20 miles
(30km),dashesaredisplayed.After
llingwithatleast10litresoffuel,the
range is recalculated and is displayed
whenitexceeds60miles(100km).
If, whilst driving, dashes are displayed
continuously in place of the digits,
contactaCITROËNdealer.
The "vehicle" tab with the range,
current fuel consumption and the
remainingdistancetorun.
The "1" tab (trip 1) with the average
speed, the average fuel consumption
and the distance travelled in trip "1".
The "2" tab (trip 2) with the same
information for a 2
nd
trip.
Reset