Operation Manual

51
READY TO GO
3
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Gearbox and steering wheel
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
6-SPEED ELECTRONIC GEARBOX
- automaticmode:gearselectorin
position A.
- manualmode:gearselectorin
position M.
Forsafety:
It is only possible to come out
of position Nifthebrakepedalis
pressed.
The change from position A (driving in
automatic mode) to position M (driving
in manual mode) or vice versa can be
madeatanytime.ThewarninglampA
goesoffintheinstrumentpanel.
Mode selection
Moving off
- To start the engine, the gear
selector must be in position N.
- Pressrmlyonthebrakepedal.
- Operatethestarter.
- When the engine is running, place
the gear selector on R, A or M as
desired.
- Releasethebrakepedaland
accelerate.
If the gear selector is not in position N,
and/orifthebrakepedalisnot
pressed,theenginewillnotstart.
Repeattheaboveprocedure.
Reverse gear
Engaging reverse gear
Move the gear selector to R.
Only attempt to select reverse gear
when the vehicle is stationary.
Neutral
Changing to neutral
Move the gear selector to N.Ifthe
vehicle is moving, do not select this
positionevenmomentarily.