Operation Manual

26
Access
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
REAR ROOF FLAP
Support bar
A support bar is provided for
transporting long loads, after opening
therearroofap.
Foldbackthesupportbarbyliftingthe
lever.
Guideittothedoorpillar.
Support the long loads to be
transported, lift them and reposition the
supportbarwithonehand.
Ensure that it is secured correctly by
pressing the handle downwards past
the point of resistance and secure the
loadsrmly.
The rear bumper has been
reinforced to serve as a footrest
whenenteringthevehicle.
Thereardoorsonlylockwhenthe
supportbarisinstalled.
Whentherearroofapisopen,take
care when driving where height is
restricted.
Never rest loads directly on the rear
doors.
Comply with the usual indications, to
warnotherdrivers.
Reservetheuseoftherearroofap
forshortjourneys.
The side supports can be used as
hookingpoints.
- lowertheblackpaddletosecure
therearroofap.
Securingtherearroofapplacesiton
the seal correctly and ensures sealing
withoutnoise.
Thisrearroofapisonlycompatible
withside-hingedreardoors.
Toopentherearroofap:
- raisetheblackpaddleofthetoggle,
- relieve the toggle by pressing the
rearroofap(downwards)then
releasethehook,
- lifttherearroofap,
- pass the point of resistance to
securetherearroofapusingthe
supportstays.
Neverdrivewithoutthestaysinplace.
Toclosetherearroofap:
- checkthatthesupportbaris
secured correctly,
- lowertherearroofap,
- whilepressingtherearroofap
(downwards),takeholdofthe
two loops of the spring then place
thehookinitshousing,
Never attach any load to the rear roof
ap.
Never drive without the support bar in
place.