Operation Manual

Audio and Telematics
253
TECHNOLOGY on BOARD
10
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
The services available depend
onthenetwork,theSIMcardand
the compatibility of the Bluetooth
®
telephoneused.Checkthetelephone
manualandwithyournetworkprovider
for details of the services available
toyou.
The ability of the system to connect
with only one profile depends on the
telephone.Thethreeprofilesmayall
connectbydefault.
Visitwww.citroen.co.ukformoreinformation
(compatibility,additionalhelp,...).
The recognised telephone
appearsinthelist.
Depending on your telephone, you may be
askedtoacceptautomaticconnectionevery
timetheignitionisswitchedon.
On return to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically and within around 30 seconds
after switching on the ignition the pairing is
done without any action on your part, with
(Bluetooth
®
activated).
To modify the automatic connection mode,
select the telephone in the list then select the
desiredprofile.
Depending on the type of telephone,
thesystemwillaskyoutoacceptornot
thetransferofyourcontacts.
If not, select "Update".
Connecting a Bluetooth
®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
connected when the ignition was last switched
off is automatically reconnected, if this
connection mode had been activated during the
pairingprocedure.
The connection is confirmed by the display of a
messageandthenameofthetelephone.
Manual connection
Press on Telephone to display the
primarypage.
Pressonthesecondarypage.
Select "Bluetooth" to display the list
ofpairedperipherals.
Selecttheperipheraltoconnect.
Press on "Search for devices".
The connection is confirmed by the display of a
messageandthenameofthetelephone.