Operation Manual

Audio and Telematics
252
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Pairing a Bluetooth
®
telephone
For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth
®
mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
Procedure (short) from the
telephone
In the Bluetooth
®
menu of your device, select
thesystemnameinthelistofdevicesdetected.
Enter a code of at least 4 figures in the device
andconfirm.
Enter this same code in the system,
select "OK"andconfirm.
Procedure from the system
Activate the telephone's Bluetooth
®
function
and ensure that it is "visible to all" (telephone
configuration).
Press on Telephone to display the
primarypage.
Pressonthesecondarypage.
Select "Bluetooth connection".
Select "Search for devices".
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended that you switch the Bluetooth
®
functiononyourtelephoneoffandthenonagain.
Select the name of the
desired peripheral from the
list and "Confirm".
Enter a code of at least 4 figures for
the connection then "Confirm".
Enter this same code in the telephone then
accepttheconnection.
Thesystemofferstoconnectthetelephone:
- in "Telephone"(hands-freekit,telephone
only),
- in "Audio streaming"(streaming:wireless
playing of audio files from the telephone),
- in "Internet" (internet browsing, only if your
telephone is compatible with the "DUN"
Dial-UpNetworkingBluetooth
®
standard).
Selectoneormoreprofilesandconfirm.