Operation Manual

Audio and Telematics
232
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
The audio system will only play audio files
with".wma,.aac,.flac,.oggand.mp3"file
extensions and with a bit rate of between
32Kbpsand320Kbps.
ItalsosupportsVBR(VariableBitRate)mode.
Noothertypeoffile(.mp4,...)canbeplayed.
".wma"filesmustbeofthestandardwma9type.
The sampling rates supported are 32, 44 and
48KHz.
Information and advice
Media
USB port
Selection of source
The steering mounted SRC (source)
button can be used to go to the next
media source, available if the source
isactive.
Selectchangeofsource.
Press on Radio Media to display the
primarypage.
The system builds playlists (in temporary
memory),anoperationwhichcantakefrom
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
numberoffolderstoreducethewaitingtime.
The playlists are updated every time the
ignition is switched off or on connection of a
USBmemorystick.Thelistsarememorised:if
they are not modified, the subsequent loading
timewillbeshorter.
InserttheUSBmemorystickintotheUSBport
or connect the USB device to the USB port
usingasuitablecable(notsupplied).
Auxiliary socket (AUX)
Connect the portable device (MP3 player…) to
theauxiliaryJacksocketusinganaudiocable
(notsupplied).
This source is only available if the "Auxiliary
socket"optionhasbeenactivatedinthe
"Media"settings.
Firstadjustthevolumeofyourportabledevice
(toahighlevel).Thenadjustthevolumeofyour
audiosystem.
Display and management of the controls are
viatheportabledevice.
Choosethesource.
To protect the system, do not use a
USBhub.