Operation Manual

19
Access
READY TO GO
3
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Good practice
Takecarenottoallowtheremote
control to come into contact with
grease, dust, rain or a damp
environment.
Aheavyobjectattachedtothekey
(keyring,...)weighingontheshaft
ofthekeyintheswitch,maycausea
malfunction.
REMOTE CONTROL
Reinitialising the remote
control
Following changing of the remote
control battery or disconnection of the
vehicle battery, the remote control may
havetobereinitialised.
Wait at least one minute before using
theremotecontrol.
Insertthekeyintheignitionswitchwith
thebuttons(padlocks)oftheremote
controlfacingyou.
Switchontheignition.
Pressthelockingpadlockforat
leastvesecondswithinthenext
tenseconds.
Switchofftheignition.
Wait at least one minute before using
theremotecontrol.
Theremotecontrolisnowworking
again.
Use only identical batteries or
batteries of an equivalent type to
those recommended by CITROËN
dealers.
Do not discard the remote control
batteries, they contain metals which
areharmfultotheenvironment.
Deposit them at a CITROËN
dealership, or at an authorised
collectionpoint.
Unfolding / folding
Changing the battery
Batteryref.:CR1620/3volts.
The"batteryat"informationisgiven
by an audible signal, accompanied by
amessageinthescreen.
To replace the battery, unclip the
casingusingacoinatthering.
Iftheremotecontroldoesnotwork
after the battery has been changed,
reinitialisetheremotecontrol.
Thereisariskofdamageifthe
replacement battery is not the correct
type.
If you do not press the button,
youmaydamagethekey's
foldingmechanism.