Operation Manual

182
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
Changing a bulb
Berlingo2VP_en_Chap08_Aide-rapide_ed02-2016
2. Sidelamps
Type A, W5W - 5W
- Remove the cover by pulling the
exiblerubbertab.
- Removethebulbholderttedby
pressurebypullingtheconnector.
- Changethebulb.
- Ensurethatthecoverisretted
correctly all round to assure correct
sealing.
Front lamps
1. Dipped / Main beam headlamps
Type C, H4 - 55W
- Remove the centre cover by pulling
theexiblerubbertab.
- Disconnecttheelectricalconnector.
- Releasetheretainingtab.
- Changethebulbtakingcare
to align the metal part with the
groovesonthelamp.
- Repositiontheretainingtab.
- Ensurethatthecoverisretted
correctly all round to assure correct
sealing.
High pressure washing
Openthebonnet.Toaccessthebulbs,
reachbehindtheheadlampunit.
Carry out the operations in reverse
ordertoreteachbulbandcheckthat
thebonnetisclosedsecurely.
Halogen bulbs must be changed
withtheheadlampoff.Waitafew
minutes(riskofseriousburns).
Do not touch the bulb directly with your
ngers,uselint-freecloths.
It is normal for condensation to form
insidetheheadlamps.Regularuseof
thevehicleeliminatesthismisting.
The bulbs must be changed with
the ignition off or with the battery
disconnected.Waitapproximately
3 minutes after changing the bulb
beforereconnectingthebattery.
Checkthatthelampsoperatecorrectly
aftereachoperation.
When using this type of washing
on stubborn dirt, do not persist on
the headlamps, the lamps and their
edges to avoid damaging their coating
andseals.